Related Products
Details
- Brand:
- SKU:
66-3384
- GTIN: 00082617826228
- UPC: 082617826228
- Description:
Restore your drivetrain's performance with the CARDONE New CV Axle Assembly, part number A166-3384. This complete, ready-to-install unit includes the constant velocity joints, axle shaft, boots, and grease—all assembled and tested for durability and fit. The CARDONE New axle is engineered to meet or exceed OE specifications, delivering smooth power transfer and articulation without binding, clicking, or vibration. Designed for front-wheel-drive and AWD vehicles, it handles sharp steering angles and suspension travel under high torque loads. Whether you're addressing torn boots, worn joints, or driveability issues, this replacement provides long-lasting reliability and reduced NVH (noise, vibration, harshness). SEO keywords: front axle assembly, CV drive shaft, FWD axle shaft kit, complete CV joint axle.
- Condition: New
- Warranty:
CV Axle Assembly - Cardone (66-3384)
- Sale Price: $92.70
Pricing is valid online only and may vary in your local store
Vehicle Fitment
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Key Product Information
Additional Information
| Brand | CARDONE New |
| ABS Tone Ring Included | Yes |
| ABS Tone Ring Tooth Quantity | 47 |
| ABS Tone Ring Type | Toothed |
| Axle Nut Included | Yes |
| Axle Nut Length | 21 |
| Axle Nut Socket Size | 32 |
| Axle Nut Thread Size | M22x1.5 |
| Axle Nut Type | Hex |
| Boot Color | Black |
| Boot Material | Neoprene |
| Boot Rib Quantity | 5 |
| CV Joints Included | Yes |
| Compressed Length | 610 |
| Contains Electronic Components | No |
| Does it require SDS | No |
| Dynamic Damper Attached | No |
| E-Waste | No |
| FAA_A1 | When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on. |
| FAA_A10 | Never allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint. |
| FAA_A11 | The most likely cause is a broken bearing cage due to excessive torque load. This is typically an outboard joint problem. |
| FAA_A2 | The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced. |
| FAA_A3 | The most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up. |
| FAA_A4 | The most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint. |
| FAA_A5 | The transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time. |
| FAA_A6 | NO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one. |
| FAA_A7 | Always use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly. |
| FAA_A8 | Never use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications. |
| FAA_A9 | When replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking. |
| FAQ_Q1 | I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why? |
| FAQ_Q10 | Can I let the CV Drive Axles hang while I am working on the car? |
| FAQ_Q11 | The wheels wobble when I make a turn. What's the problem? |
| FAQ_Q2 | When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise? |
| FAQ_Q3 | When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong? |
| FAQ_Q4 | I hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this? |
| FAQ_Q5 | I removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do? |
| FAQ_Q6 | The old CV Drive Axle has a locking style (prevailing torque) nut. Should I reuse it? |
| FAQ_Q7 | The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it? |
| FAQ_Q8 | Is it OK to use an impact hammer to install the retaining nut? |
| FAQ_Q9 | When I replace the CV drive axles, should I reuse the old seals? |
| Grade Type | Standard |
| Inboard Joint Type | Splined |
| Inboard Spline Quantity | 28 |
| Is Item A Chemical | No |
| Is Or Contains A Battery | No |
| Is Or Contains A Bulb | No |
| Is Prop Sixty Five Affected | No |
| Is the item CARB affected | No |
| Manufacturer Brand | CNRD |
| Mount Type | Spline |
| Outboard Joint Type | Splined |
| Outboard Spline Quantity | 27 |
| Package Contents | Complete Axle; Instruction Sheet |
| Shaft Diameter | 28 |
| Shaft Material | Steel |
| Slip Yoke | No |
| UPC | 00082617826228 |
| Universal Joints Included | No |
Features and Benefits
Key Product Benefits
- Proprietary engineering processes ensure that all CV Drive Axles meet O.E. form, fit and function.
- Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure.
- CV Drive Axle part numbers with an “HD” suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and durability versus a traditional neoprene boot.
- A new axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped.
- CV Drive Axle measurements are validated after assembly to ensure a proper fit.
- Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
- High-quality grease withstands high-temperature and high-torque demands to ensure long-lasting, reliable performance.
- Splines are precision rolled to ensure proper fit of CV Drive Axle into the mating hub and transmission, which eliminates installation hassles.
- Threads are precision rolled to ensure proper fit when axle nut is installed.
- Transmission seal diameter is precision-machined after heat treatment to ensure correct surface finish, promoting long seal life.
Interchange
Interchange
Policies
Policies
Product Reviews
Brand
Store
aftermarket
About AutoNation Aftermarket Parts | Cardone Authorized Dealer
Welcome to AutoNation Aftermarket Parts (aftermarket.autonationparts.com) — your premier destination for high-performance components, heavy-duty upgrades, and replacement auto parts engineered to match your vehicle's specifications. Backed by AutoNation’s nationwide network of over 300+ locations, our dedicated aftermarket store delivers top-tier components built to meet or exceed original equipment standards.
Popular Auto Parts Categories:
- A/C & Heating Systems
- Brakes & Brake Parts
- Air Intake Systems
- Batteries & Electrical Parts
- Cooling Systems
- Fuel Systems
- Suspension & Steering
- Transmission & Drivetrain
- Towing & Hitches
- Wheels & Accessories
Looking for Cardone OEM Quality & Fast Shipping?
Check your vehicle year, make, model, and engine requirements to ensure exact compatibility before placing your order.
Product Details
Upgrade or restore your vehicle with CV Axle Assembly (SKU: 66-3384) from Cardone. Manufactured to strict quality standards, this replacement component delivers exact-fit precision, superior durability, and reliable operation under demanding driving conditions.
| Product Name | CV Axle Assembly |
| Manufacturer / Brand | Cardone |
| Part Number / SKU | 66-3384 |
| Part Condition | Brand New Replacement Part |
| Fitment Standard | Direct Fit OEM Replacement |
Frequently Asked Questions for CV Axle Assembly
What are the core specifications of CV Axle Assembly?
This CV Axle Assembly (SKU: 66-3384) is built by Cardone using high-grade materials engineered for long-lasting performance, thermal stability, and exact-fit vehicle compatibility.
Is CV Axle Assembly an original OEM or aftermarket replacement part?
This item (SKU: 66-3384) manufactured by Cardone is a premium aftermarket replacement part engineered to meet or exceed original equipment manufacturer specifications. It offers exact-fit reliability and maximum durability at a competitive price point.
How do I confirm CV Axle Assembly fits my specific vehicle?
To verify fitment for CV Axle Assembly, check compatibility using our fitment lookup tool above. Cross-reference your exact year, make, model, and engine specifications before ordering to ensure proper clearance and performance.
What related components should I inspect when replacing this part?
When installing a new CV Axle Assembly, technicians recommend inspecting surrounding hardware, mounting brackets, seals, and connecting lines. Replacing worn supporting components at the same time helps prevent premature wear and maintains peak system efficiency.
What quality and manufacturing standards does Cardone follow?
Cardone replacement parts undergo rigorous quality testing and strict dimensional tolerance checks. Engineered using premium-grade materials, this component is designed to withstand harsh operating conditions, thermal stress, and routine vehicle vibration.
Can I install CV Axle Assembly myself or do I need a technician?
Many Cardone components are designed for straightforward DIY installation. Refer to factory service manuals or OEM repair procedures for exact torque specifications and sequence steps. If complex electrical diagnosis, specialized hydraulic bleeding, or heavy mechanical tools are required, consult a certified automotive technician.
What are the common symptoms indicating this component needs replacement?
Key indicators that a replacement part like CV Axle Assembly may be needed include unusual noises, diminished mechanical responsiveness, fluid leaks, visible structural wear or corrosion, or active diagnostic trouble codes (DTCs) triggered by related sensors.
Does CV Axle Assembly come with mounting hardware included?
Hardware inclusions vary by part type and manufacturer setup. Check the product specifications and images above to confirm whether installation hardware, gaskets, or adapters are supplied directly in the package.
How fast will CV Axle Assembly ship to my location?
Orders for CV Axle Assembly (SKU: 66-3384) are processed rapidly from our nationwide distribution centers. Visit our Shipping Policy page to review estimated ground transit times, expedited shipping rates, and order tracking details.
What is the return policy for CV Axle Assembly?
If CV Axle Assembly arrives damaged or does not fit your vehicle, you can initiate a return or exchange under our standard Returns & Refund Policy. Please verify your vehicle fitment details prior to ordering to ensure seamless compatibility.
Why buy Cardone parts from AutoNation Aftermarket?
AutoNation is one of America's most trusted automotive retailers with over 300+ locations nationwide. When you order Cardone products from our aftermarket store, you get competitive direct pricing, guaranteed product authenticity, and dedicated customer support.