Recommended Products
Automatic Transmission Torque Converter (CVT, Code 21F) High Performance Replacement - TC Remanufacturing (DA69-21F)
Details
Details
- Brand:
- SKU:
DA69-21F
- GTIN: 00810044898491
- UPC: 810044898491
- Description:
Remanufactured automatic transmission torque converter for Nissan CVT applications using the Jatco RE0F10A (JF011E). 10.44-inch diameter, 9-inch bolt circle, 6 mounting studs (10mm x 1.25), 20 spline hub, pilot Ø 0.785 in. Matches stamped converter code 21F. Equivalent catalog reference DA69-21F.
- Condition: New
Additional Information
Additional Information
| FITMENT | For Nissan models equipped with the Jatco RE0F10A (JF011E) CVT using converter code 21F and a 6‑stud flexplate pattern. Verify the code on the original converter and the 9 in bolt circle before ordering. Nissan Altima (2007-2013): 2.5L I4 Nissan Altima (2013): 3.5L V6 Nissan Altima (2013-2016): 3.5L V6 Nissan Rogue (2014-2016): 2.5L I4 Nissan Rogue Select (2014-2015): 2.5L I4 |
| SYMPTOM | Common torque converter issues include shudder/vibration on light acceleration, hesitation or slip, overheating, and contaminated/dark fluid. Fault codes related to the torque converter clutch circuit often include P0740 (TCC circuit), P0741 (TCC performance/stuck off), and P0744 (TCC intermittent). |
| TROUBLESHOOTING | Confirm converter code '21F' on the original unit; check bolt pattern (6 studs, 10mm x 1.25) and 9 in bolt circle. If TCC codes persist, inspect wiring/solenoids and valve body per JF011E diagnostics before condemning the converter. |
| INSTALLATION | Pre-fill the converter with appropriate CVT fluid, install onto transmission input, and rotate until fully seated—typically three distinct engagements ('clicks'). After mating the trans to the engine, verify 0.060–0.187 in clearance between the flexplate and converter pads before tightening. Do not draw the transmission to the engine with bellhousing bolts. |
| MAINTENANCE | |
| GENERAL NOTES | |
| FAULT CODES | |
| REPLACEMENT | DA69-21F Nissan 31100-1XF0D |
| WEIGHT | 35 lb |
| DIMENSIONS | 10.44 in diameter; 9 in bolt circle; 6-stud mount |
Related Products
Vehicle Fitment
Vehicle Fitment
Select Your Vehicle Select
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|