Recommended Products
Fuel Injection Throttle Body - Cardone (6E-0023)
Details
Details
- Brand:
- SKU:
6E-0023
- GTIN: 00884548283473
- UPC: 884548283473
- Description:
Designed to control the airflow entering the engine, the CARDONE New Fuel Injection Throttle Body A16E-0023 plays a vital role in your vehicle’s air/fuel mixture management. Constructed from durable materials like aluminum or composite plastics, the A16E-0023 throttle body is built to withstand the high pressures and temperatures found in the intake manifold. CARDONE New guarantees that the A16E-0023 throttle body meets OEM specifications for size, fitment, and airflow efficiency, contributing to smooth acceleration and optimal engine performance.
- Condition: New
Additional Information
Additional Information
| Brand | CARDONE New |
| Adjustable | No |
| Bore Diameter | 76.00 |
| Contains Electronic Components | Circuit Board |
| Does it require SDS | No |
| E-Waste | Yes |
| FAA_A1 | The new electronic throttle body is engineered and manufactured to match the O.E. design. |
| FAA_A10 | No, bypassing the coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following O.E. supersessions where the pipes have been removed. Instructions are provided for rerouting coolant hoses. |
| FAA_A11 | Not all throttle bodies have this feature, where the throttle valve is reversed from its normal movement by the control module, which breaks up any ice formation between the throttle bore and valve. This feature is based on application. |
| FAA_A12 | The throttle body is also part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management. |
| FAA_A2 | When installing the new electronic throttle body, there is no need to modify the vehicle for installation. |
| FAA_A3 | The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicle’s powertrain control module or throttle actuator control module. |
| FAA_A4 | When an electronic throttle body fails, the controlling module will illuminate the MIL/SES/CEL. The module will then activate a fail-safe mode operation and gradually reduce the engine’s speed back to an idle RPM. |
| FAA_A5 | The most common failure in an electronic throttle body is the integrated throttle position sensor. The ETB is equipped with high and low voltage reference throttle position sensor for redundancy. Either one of these sensors could fail, or possibly both. |
| FAA_A6 | A relearn calibration procedure is necessary after installation of replacement throttle body. |
| FAA_A7 | Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application. |
| FAA_A8 | We do not sell throttle body spacers, nor do we recommend the use of a spacer. |
| FAA_A9 | The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing, preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures. |
| FAQ_Q1 | Are your new throttle bodies the same design as O.E.? |
| FAQ_Q10 | Is it OK to bypass the coolant hoses? |
| FAQ_Q11 | Do all throttle bodies have an ice-breaker mode for extreme cold starts? |
| FAQ_Q12 | What else does the throttle body control other than idle air bypass and acceleration throughout driving range? |
| FAQ_Q2 | Will I have to modify anything on the vehicle to install your new throttle body? |
| FAQ_Q3 | What’s an electronic throttle body? |
| FAQ_Q4 | What happens when an electronic throttle body fails? |
| FAQ_Q5 | What causes the electronic throttle body to fail? |
| FAQ_Q6 | Is there anything that has to be done after installing the replacement throttle body? |
| FAQ_Q7 | Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response? |
| FAQ_Q8 | Do you sell throttle body spacers? |
| FAQ_Q9 | The O.E. throttle body has coolant hoses attached. What’s the purpose? |
| Fuel Injectors Included | No |
| Fuel System Grade | Regular |
| Fuel System Type | Gas |
| Gasket Or Seal Included | No |
| Idle Air Control Motor Included | No |
| Inlet Diameter | 87.00 |
| Inlet Type | Circle |
| Is Item A Chemical | No |
| Is Or Contains A Battery | No |
| Is Or Contains A Bulb | No |
| Is Prop Sixty Five Affected | No |
| Is the item CARB affected | No |
| Manufacturer Brand | CNRD |
| Mounting Hardware Included | No |
| Outlet Diameter | 77.00 |
| Outlet Quantity | 1 |
| Outlet Type | Round |
| Package Contents | Electronic Throttle Body; Instruction Sheet |
| Terminal Type | Blade |
| Throttle Body Finish | Natural |
| Throttle Body Spacer Included | No |
| Throttle Body Type | Electric |
| Throttle Position Sensor Included | Yes |
| UPC | 00884548283473 |
| Venturi Quantity | 1 |
Related Products
Vehicle Fitment
Vehicle Fitment
Select your vehicle Browse Catalog