Recommended Products
Front Driver Side Brake Hose - ACDelco (176-2024)
- Sale Price: $39.67
Details
Details
- Brand:
- SKU:
176-2024
- GTIN: 00808709630845
- UPC: 808709630845
- Other Names:
84068672
- Description: GM Genuine Parts Brake Hydraulic Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The hydraulic brake hose carries fluid to transmit force within the hydraulic brake system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Condition: New
Additional Information
Additional Information
| Brand | GM Genuine Parts |
| Axis 1 Length | 9.055 230 |
| Axis 2 Length | 30 |
| Axis 2 Length (in) | 1.181102362 |
| Axis 3 Length | 9.685 246 |
| Bracket Included | Yes |
| Bracket Material | Steel |
| Bracket Quantity | 1 |
| DOT Approved | Yes |
| End 1 Fitting Material | Steel |
| End 1 Fitting Type | Banjo |
| End 2 Fitting Inside Diameter | 10 |
| End 2 Fitting Material | Steel |
| End 2 Fitting Type | Female |
| End 2 Type | Inverted |
| Features & Benefits - Bullet 1 | Is designed to carry hydraulic fluid throughout the hydraulic brake system |
| Features & Benefits - Bullet 2 | Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE) |
| Features & Benefits - Bullet 3 | GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors |
| Features & Benefits - Bullet 4 | GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle |
| Features & Benefits - Bullet 5 | GM regularly updates production and service part designs to integrate new materials and technologies |
| Gasket Or Seal Included | No |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Grommets Included | No |
| Height (in) | 1.8 |
| Length (in) | 21.1 |
| Mounting Hardware Included | Yes |
| Outer Sleeve Material | EPDM |
| Overall Length | 19.92 506 |
| Programming Required | No |
| Shield Material | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Vehicle pulls to the left or right when brakes are applied. |
| Weight (lb) | 0.6 |
| Width (in) | 2.4 |
Related Products
Vehicle Fitment
Vehicle Fitment
Select your vehicle Browse Catalog