| Brand | ACDelco Gold |
| Abutment Clips Included | Yes |
| Adhesive Backed Pad Shim | No |
| Backing Material | Steel |
| Backing Plate Color | Black |
| Brake Lubricant Included | No |
| Chamfered Edges | Yes |
| FAQ - Answer 1 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
| FAQ - Answer 2 | Yes, ACDelco also offers GM OE brake pads and Advantage brake pads. |
| FAQ - Answer 3 | No, but it is a good idea to inspect your brake pads at each tire rotation. |
| FAQ - Answer 4 | Yes, ACDelco Professional Disc Brake Pads come with a limited lifetime warranty. |
| FAQ - Question 1 | Do I have to replace all my brake parts when replacing my brake pads? |
| FAQ - Question 2 | Does ACDelco offer other grades of brake pads? |
| FAQ - Question 3 | Do I have to replace my brake pads after a certain amount of time? |
| FAQ - Question 4 | Are these brake parts durable? |
| FMSI Number | D1913 |
| Features & Benefits - Bullet 1 | Integrally molded to backing plate for bond integrity |
| Features & Benefits - Bullet 2 | Premium shims, slots, and chamfers can help to dimish noise, vibration, and braking harshness |
| Features & Benefits - Bullet 3 | Stamped backing plate allows for proper pad movement within the caliper assembly, help reduce noise, brake pulsation, and helps to protect against premature wear |
| Features & Benefits - Bullet 4 | Tested to SAE J2784 for braking effectiveness, along with Noise/Vibration/Harshness (NVH) and durability/wear testing |
| Features & Benefits - Bullet 5 | Select Gold hardware includes nitrile coated material to help reduce noise |
| Features & Benefits - Bullet 6 | Some ACDelco Gold parts may have formerly appeared as ACDelco Professional |
| Features & Benefits - Bullet 7 | Premium aftermarket replacement part |
| Features & Benefits - Bullet 8 | Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models |
| Friction Material Attachment | Bonded |
| Friction Material Composition | Hybrid |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 2.12 |
| Inner Pad Height | 2.350 |
| Inner Pad Overall Thickness | 0.713 |
| Inner Pad Width | 5.539 |
| Length (in) | 9.25 |
| Mounting Hardware Included | Yes |
| Outer Pad Height | 2.350 |
| Outer Pad Overall Thickness | 0.713 |
| Outer Pad Width | 5.539 |
| Pad Quantity | 4 |
| Pad Shim Color | Silver |
| Pad Shims Included | Yes |
| Pad Wear Sensor Included | Yes |
| Pad Wear Sensor Type | Mechanical |
| Prepared For Pad Wear Sensor | Yes |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Chirping, grinding, or squeaking noises when braking. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Difficulty stopping the vehicle. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | A low or sinking brake pedal. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Brake pad signs of wear include: |
| Slotted | Yes |
| Weight (lb) | 4.3 |
| Width (in) | 6.12 |
