Recommended Products
Disc Brake Caliper Bolt - ACDelco (179-711)
- Sale Price: $24.44
Details
Details
- Brand:
- SKU:
179-711
- GTIN: 00707773612484
- UPC: 707773612484
- Positions: Front
- Other Names:
11610466
- Description: GM Genuine Parts Disc Brake Caliper Guide Pins are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The guide pin is responsible for maintaining the proper brake pad angle within the caliper, allowing proper contact with the rotor. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Condition: New
Additional Information
Additional Information
| Brand | GM Genuine Parts |
| Attached Washer | No |
| Bolt Type | Hex Flanged Head |
| Features & Benefits - Bullet 1 | Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE) |
| Features & Benefits - Bullet 2 | GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors |
| Features & Benefits - Bullet 3 | GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle |
| Features & Benefits - Bullet 4 | GM regularly updates production and service part designs to integrate new materials and technologies |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Grade | 10.9 |
| Head Drive Type | Hex Flanged Head |
| Head Tool Size (mm) | 18 |
| Heat Hardened | Yes |
| Height (in) | 1.1 |
| Length | 4 103.5 |
| Material | Steel |
| Programming Required | No |
| S.A.E. Or Metric | Metric |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Vehicle pulls to the left or right when brakes are applied. |
| Thread Diameter (in) | 0.63 |
| Thread Diameter (mm) | 16 |
| Thread Length (in) | 1.24 |
| Thread Length (mm) | 31.5 |
| Thread Pitch (in) | 1.5 |
| Washer Attached | No |
| Weight (lb) | 0.03 |
| Width (in) | 1.1 |
Related Products
Vehicle Fitment
Vehicle Fitment
Select Your Vehicle Select
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|