Image is not a representation of the actual product
Recommended Products
Front Disc Brake Rotor - ACDelco (13552823)
- Sale Price: $89.38
Details
Details
- Brand:
- SKU:
13552823
- GTIN: 00195491681972
- UPC: 195491681972
- Positions: Front
- Other Names:
13552823
- Description: GM Genuine Parts Disc Brake Rotors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc brake rotors are mounted to the wheel hub where the calipers press your vehicle's brake pads against the disc surface to help slow down the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
disc-brake-rotor;rotor;brake-rotor;disc-brake; - Condition: New
Additional Information
Additional Information
| Brand | GM Genuine Parts |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Disc Finish | Ground |
| Discard Thickness | 0.91 23 |
| Features & Benefits - Bullet 1 | Most GM OE brake rotors sold in the U.S are Ferritic Nitro-Carburized, or FNC rotor |
| Features & Benefits - Bullet 2 | These rotors typically last two times longer, compared to non-FNC rotors, due to improved pad wear behavior |
| Features & Benefits - Bullet 3 | OE brake components are specifically designed to work with your GM vehicle safety systems |
| Features & Benefits - Bullet 4 | Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE) |
| Features & Benefits - Bullet 5 | GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors |
| Features & Benefits - Bullet 6 | GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle |
| Features & Benefits - Bullet 7 | GM regularly updates production and service part designs to integrate new materials and technologies |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Grade Type | Regular |
| Hat Finish | Coated |
| Inside Diameter | 5.75 146 |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 112.45 4.43 |
| Nominal Thickness | 26 |
| Outside Diameter | 11.81 300 |
| Overall Height | 1.79 45.5 |
| Rust Resistant Coating | Yes |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Visible ridges or deep grooves on the rotor surface. |
| Solid Or Vented Type Rotor | Vented |
| Stud/Lug Hole Circle Diameter | 112.45 4.43 |
| Stud/Lug Hole Diameter | 14 |
| Stud/Lug Hole Quantity | 5 |
| Surface Type | Smooth |
Related Products
Vehicle Fitment
Vehicle Fitment
Select Your Vehicle Select
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|